W71A Compacting Roller + Electric Start
Unimec New Machines W71A Compacting Roller + Electric StartUnimec Compacting Pedestrian Rollers The Unimec W71A is the most advanced pedestrian roller available today. SMOOTH TRANSMISSION - Hydrostatic drive coupled with fingertip controls. . BETTER COMPACTION - Infinitely varied speed coupled to higher centrifugal force. ....
Unimec Compacting Pedestrian Rollers
The Unimec W71A is the most advanced pedestrian roller available today.
- Hydrostatic drive coupled with fingertip controls.
- Infinitely varied speed coupled to higher centrifugal force.
- Underslung counterweights minimise kick-back and operator fatigue.
LOWEST MAINTENANCE COSTS
- Simplified transmission and vibrator drive, sealed bearings.
Robin EH25-2D 8.5HP 4 stroke engine is provided as standard. This manual start engine provides more that adequate power. Other engines are available on order.
The Unimec Roller is fitted with an Eaton Hydrostatic fan cooled combined pump valve motor unit, giving infinitely variable speeds to a maximum of 3KPH forward and reverse with automatic braking on inclines and when roller is parked.
Control is through a fingertip lever on the handle actuating a morse teleflex aircraft type control cable. System is fitted with external free wheeling control allowing roller to be moved when engine is not running.
Final drive is through a primary chain to a fully enclosed secondary pinion and internal ring gear. The Pinion is mounted via heavy duty sealed roller bearings.
A single vibrator shaft is mounted inside the drum and runs on twin row pre-lubricated ball bearings. Vibration is isolated from the frame and transmission by means of combined torsional and shear mounts. Drive to the vibrator shaft is through an 'A' section v-belt engaged by a fingertip control lever on the handle.
FRAME - Folded and Boxed Steel
A folded and boxed steel fabrication with central lifting/protection frame giving single point slinging. Full width parking legs and adjustable scrapers are fitted to both front and back of the machine. A tie down point is provided under the handle.
WATER SPRINKLER SYSTEM
WATER SPRINKLER SYSTEM - A 20 litre water tank complete with bronze control valve and full width sprinkler bar.
|Height to top of lifting point||1230mm|
|Speeds - Infinitely variable||0 - 3KPH Fwd/Rev|
|Vibration Frequency||75 Hz|
|Centrifugal Force||12 kN|
|Nominal working grade||- vibrating||33%|
|- non vibrating||45%|
|Drum width||710mm (28")|
|Ground clearance||- edge roll side||400mm|
|- drive side||65mm|
|Overhang||- edge roll side||20mm|
|- drive side||120mm|
|Capacity||- water||20 litre|
|- fuel||6 litre|
|Maximum lift||- non cohesive soil||150/200mm|
|- cohesive soil||100mm|
VR01 100Price: $18,150.00In stock! Order now!Unimec